What this calculator does
Enter the battery’s capacity in ampere-hours (Ah), its voltage, the total load you want to run in watts, and the inverter’s efficiency. The calculator estimates the backup time in hours and minutes.
Estimate how many hours of power cut your inverter battery can cover for the fans, lights and appliances you plan to run.
Enter the battery’s capacity in ampere-hours (Ah), its voltage, the total load you want to run in watts, and the inverter’s efficiency. The calculator estimates the backup time in hours and minutes.
Backup (hours) = Battery Ah × Battery voltage × Efficiency ÷ Load (W)
Ah × V gives the battery’s stored energy in watt-hours. Efficiency accounts for energy lost in the inverter as it converts battery DC to household AC.
A 150 Ah, 12 V tubular battery running 300 W of load (three fans, four LED lights and a Wi-Fi router) through an inverter that is 85% efficient:
The formula assumes you can use the battery’s full rated capacity. You usually cannot, and should not:
Lithium batteries tolerate deeper discharge, often 80–90%, so they come closer to the calculated figure.
Most home inverters of 700–1,100 VA cannot run geysers, irons, induction cooktops or ACs. Even when a high-wattage appliance runs, it empties the battery very quickly. Check the inverter’s VA rating as well as the battery.
On paper, about 5 hours at 300 W with 85% efficiency. For long battery life with lead-acid, plan for around half of that.
Tall tubular lead-acid batteries handle deep cycling better than flat-plate ones. Lithium batteries handle it best but cost more.
Add the wattage of everything that runs at the same time during a power cut.
The maths is the same. The UPS page shows minutes and focuses on computer loads.
Not directly. VA limits how much load you can connect; battery Ah decides how long it lasts.